Moving Kitchen Plumbing to a New Location


Moving Kitchen Plumbing to a New Location
This video discusses how to move your hot and cold water lines to new fixture locations in your new kitchen. Often a new kitchen layout involves moving the sink, dishwasher and refrigerator to a new location. When this happens the plumbing system must move with these fixtures and appliances. This video explains one way of relocating water and electric lines.

Visit Us At: http://www.doncsale.co.uk/

When to Use Sealants on Threaded Plumbing Connections


When to Use Sealants on Threaded Plumbing Connections
Making watertight connections with This Old House plumbing and heating expert Richard Trethewey. (See below for a shopping list.)

Click here to SUBSCRIBE to the official This Old House YouTube channel: http://www.youtube.com/subscription_center?add_user=thisoldhouse

How to Fix a Leaking Rooftop Vent: https://www.youtube.com/watch?v=mNM-JUC7ZEA&list=PLkJADc1qDrr_0NxtmzECiOWkr5de82kXV&index=50

How to Prevent Frozen Pipe: https://www.youtube.com/watch?v=BVItL66doqw&list=PLkJADc1qDrr_0NxtmzECiOWkr5de82kXV&index=93

All About Copper Pipes: https://www.youtube.com/watch?v=d8fpchYfC6Y&list=PLkJADc1qDrr_0NxtmzECiOWkr5de82kXV&index=14

Shopping List for When to Use Sealants on Threaded Plumbing Connections:
– Teflon tape, used to wrap around threaded plastic fittings
– pipe sealant (a.k.a. pipe dope), used for brushing onto threaded fittings
– wicking string, used to wrap around and fill spaces between male threads

Follow This Old House:
Facebook: https://www.facebook.com/ThisOldHouse
Twitter: https://twitter.com/thisoldhouse
Pinterest: http://www.pinterest.com/thisoldhouse/
G+: https://plus.google.com/+thisoldhouse/posts
Instagram: http://instagram.com/thisoldhouse
Tumblr: http://thisoldhouse.tumblr.com/

Visit Us At: http://www.doncsale.co.uk/

How to use a Drain Snake – Plumbing Snake


How to use a Drain Snake – Plumbing Snake
Subscribe and visit our Fix It Home Improvement podcast on iTunes or Stitcher https://itunes.apple.com/us/podcast/fix-it-home-improvement/id880903087?mt=2
I show how to use a drain snake on a kitchen sink drain.
A power drain snake is an excellent tool for clogged drains, it will easily unclog any buildup of food, grease or soap.

You can rent one at any rental places. If you are in the Chicago area, I go to Jack’s Rental. You can see what they have at http://www.jacksrental.com/.

Visit Us At: http://www.doncsale.co.uk/

Noisy Water Pipe Hammering Tips – Plumbing Maintenance and Repairs


Noisy Water Pipe Hammering Tips – Plumbing Maintenance and Repairs
http://gregvan.com Click on this link for more information about construction, maintenance and home repairs. Noisy water pipe hammering can be a big problem and actually leads to some of the most expensive home repairs you can imagine. This is a problem that must be fixed as soon as possible and if you’re having problems with noisy pipes clanging around after you shut off a water valve or water faucet, then one of these tips just might provide you with a solution to your problem.

Visit Us At: http://www.doncsale.co.uk/

How to solder copper pipe – Plumbing Tips


How to solder copper pipe – Plumbing Tips
http://www.plumberparts.co.uk

A brief description on how to solder copper pipe. How to prepare copper pipe for soldering and how you should do it. Where to buy fittings online from http://www.plumberparts.co.uk Plumbing Tips
plumberparts.co.uk, honest reviews and advice

***VISIT OUR SPONSORS***
http://www.draytoncontrols.co.uk | http://www.traderadiators.com

hello and welcome to our tutorial on how to solder copper pipe
to make this a little bit easier you’ll need just a few tools
firstly some pipe cleaner to clean the pipe
a flux brush
a roll of solder lead free for potable water
a tub of flux a wet cloth
a heat mat and a soldering torch
first use your pipe cleaner to clean the
pipe this will aid the soldering process
you can also use a kitchen scouring pad although it will take a little bit
longer
once the pipe is clean use your flux brush to apply flux to the clean areas of
the pipe
now put together the joint you intend to
solder
now reel off a long amount of
solder
this will prevent your hands from being burned by being to close to the heating
area
now light your gas torch and adjust it to a not too fiercer setting
apply heat evenly over the whole fitting
after a few seconds you should be able to tap the end of the solder and it should melt
into the fitting
add enough solder to create a water tight fitting
when you’ve done this wait a few seconds then use a wet cloth to cool
it off. This will also clean any excess flux from around the fitting.
remove your heat matt and you’re done!
plumberparts.co.uk
honest reviews and advice

Visit Us At: http://www.doncsale.co.uk/

Plumbing Tips


Plumbing Tips
This video is kind of dumb, and the joke is so unoriginal we’re a little bit embarrassed that we stooped to using it. On the other hand– butt crack. Dumb and unoriginal… butt crack. You’re going to have to make this decision on your own.

Visit Us At: http://www.doncsale.co.uk/

How Much Slope Per Foot in Plumbing Drain Pipes – Framing and Plumbing Layout


How Much Slope Per Foot in Plumbing Drain Pipes – Framing and Plumbing Layout
http://www.bathremodel.gregvan.com and click on this link if you’re interested in looking at a bathroom remodeling project. Watch this video to learn more about sloping drainage pipes. Remember, to always check with your local building department to verify anything you watch on Youtube, including my videos. Building codes can change and often do. Horizontal drainage pipes usually slope a quarter inch per foot unless they’re 4 inches or larger, then they might only require an eighth of an inch per foot. Don’t forget to keep watching our videos, visit our websites and check out a few of the books I’ve written.

Visit Us At: http://www.doncsale.co.uk/